Graphics Outfitters™ or GO™ utilizes two licensing models one for the frontend applications and one for the rendering application see below for explanations of both structures. When purchasing a Graphics System from GO™ you are purchasing two independent licenses. Front End Applications: Front end application are designed and licensed through GO™ depending on the
Category Archives: In The News
This guide assumes you have a basic understanding on setting up ScoreBridge™ if not please read this SETUP GUIDE Add the Websocket address of either your ScoreBridgeIP™ or ScoreIP™. The formatting must be ws://<ip-address>/ws Choose the sport and protocol the scoreboard is set to Add the Reference Variables you need to display in your
Tools->Application Settings->Timing In the Recording Duration area choose the Recoding type and adjust the duration.
Rental Equipment Support Phone: (442) 777-3748 Technical Support Phone: (650) 761-0584 Support Email: email@example.com
If you need a copy of HyperTerminal™ download it HERE HyperTerminal is a windows bases serial port monitor and has no affiliation with Graphics Outfitters Software. If you do not see data in HyperTerminal™ verify your connections are correct coming from the controller. To use HyperTerminal™ as a serial port monitor or dumb terminal Connect
This is a complete guide for setting up ScoreBridge™ from scratch. Prerequisites: Latest Windows update ScoreBridge™ Software Download Link BEFORE YOU START. It is very important that you verify you are getting scoreboard data out of your controller first. If you have not confirmed this, please follow this guide CONNECTING EXTERNAL DEVICES . Install ScoreBridge™
To communicate with an external device, naturally it must be connected to a host system and powered up. As well, ScoreBridge™ must be configured to find the connection. Let’s begin by connecting the external device, and then continue to determine the identity Windows™ has assigned to that specific port: 1. Connect a suitable cable from