If you need a copy of HyperTerminal™ download it here HyperTerminal is a windows bases serial port monitor and has no affiliation with ANY Graphics Outfitters Software. If you do not see data in HyperTerminal™ verify your connections are correct coming from the controller. To use HyperTerminal™ as a serial port monitor or dumb terminal
Author Archives: admin
This is a complete guide for setting up ScoreBridge™ from scratch. Prerequisites: Latest Windows update ScoreBridge™ Software Download Link BEFORE YOU START. It is very important that you verify you are getting scoreboard data out of your controller first. If you have not confirmed this, please follow this guide CONNECTING EXTERNAL DEVICES . Install ScoreBridge™
You can run a program once as an administrator, or you can set a program to permanently run as an administrator. Run a program once as an administrator Navigate to the program folder of the program you want to run. For example, C:\Program Files (x86)\Graphics Outfitters\ScoreBridge\ScoreBridge.exe. Right-click the program icon (the .exe file). Choose Run
1) Launch ScoreBridge™ and load a configuration. 2) Verify the input method is set to OSC over IP (see Fig 1) then select the Settings button. 3) In the Settings panel make sure the OSC tab is selected. The IP and Port should not change (see Fig 2) 4) Create your reference variable for the
Summary Sometimes installation problems may occur. One reason for this is that important Windows updates are not installed. This could be the cause of the problem. You have to take into account your computer specs to make sure you have a machine that is capable of running the software. Resolution Please check the following: Make
To communicate with an external device, naturally it must be connected to a host system and powered up. As well, ScoreBridge™ must be configured to find the connection. Let’s begin by connecting the external device, and then continue to determine the identity Windows™ has assigned to that specific port: 1. Connect a suitable cable from
The Configuration editor is in C:\Program Files\Ventuz Technology Group\Ventuz 4\VentuzConfig.exe. Choose the appropriate video output and resolution. Drag to the Outputs panel. Click save to apply the setting.
The Configuration editor is in C:\Program Files\Ventuz Technology Group\Ventuz 4\VentuzConfig.exe Toggle down Audio, Video and Hardware Device Mapping and choose your video output method. Click save to apply the setting.
Scorebridge™ for DataPool™ now provides an application to parse Scoreboard Data Feeds and make the data available in Vizrt™ DataPool™. Interfacing available for Fairplay MP-50, MP-70, MP-72, OES, Whiteway, Daktronics RTD, RTD2, NBA, Daktronics TV Feed, Colorado Timing System 6 swimming.