ScoreBridge™ Settings Using ScoreOCR™

ScoreBridge™ OCR

Fig 1 Input settings

1) Launch ScoreBridge™ and load a configuration.

2) Verify the input method is set to OSC over IP (see Fig 1) then select the Settings button.

3) In the Settings panel make sure the OSC tab is selected. The IP and Port should not change (see Fig 2)

4) Create your reference variable for the data you are parsing and select the correct format i.e 4 Digit Clock [12:34]

5) !!!!!EXTREMELY IMPORTANT!!!!!!!!! The OSC label MUST be formatted with a forward slash i.e /time1 .etc

OCR Scorebridge

Fig 2, OSC settings